ZT1806 Free Diving Masks Silicone Compact Sphera X Free Subsurface
Mirror Low Capacity
This is a diving mirror with ergonomic design concept, very fit to
the face, comfortable to wear, can be used fo free diving
Descriptions
•Resin lens, uv resistance, high transmittance, clear vision, no
deformation of the picture
•Food grade liquid silica gel, safety and environmental protection
•Ultra low volume, 180 degree field of vision
•New design silicone skirt hem, more comfortable to wear
•Fast adjustable microstrip buckle system
•Color: white/black/pink/transparent
•Weight: 150g
Specifications
| Material | Liquid silica gel + resin lens |
| Size | 11.5*10cm |
| Style | Two glass lens |
| Color | White/black/pink/transparent |
| weight | 150g |
| Applicable people | Adults |
Introduction
The submersible mirror is a device that allows divers to enjoy the
beauty of the sea more clearly in the water. Because water is
denser than air, light is refracted when it hits the water, so when
you open your eyes in the water, you see a blur. The focal length
of the eye is adjusted according to the light in the air. The face
mirror preserves the cavity in front of your eyes and allows you to
see clearly.
Operation use:
(1) Adjust the fixed band to the appropriate tightness before
wearing the face mirror.
(2) First put the mirror on the right position of the face.
(3) Use the nose to inhale the mirror adsorption on the face.
(4) Adjust the left and right ends of the fixed band to appropriate
tightness by quick adjustment buckle, and the fixed band of the
mirror should be above the ear (tightness should not be too tight).
(5) Hair or head coverings (no hair or head coverings should be
pressed on the skirt of the mirror).
(6) After diving, use quick adjustment buckle to loosen the fixed
band of the mirror.
Common troubleshooting:
(1) Failure mode 1: water enters the mirror
Cause analysis:
A mirror skirt appeared pressure hair, pressure head cover;
B side mirror is too loose or too tight;
C) breathing through the nose;
Troubleshooting:
A. After wearing the face mirror, check whether the hair and head
cover press the skirt of the face mirror;
B. Adjust the face mirror to appropriate tightness;
C Develop the habit of breathing through your mouth.
(2) Failure mode 2: The tightness of the mirror cannot be adjusted
Cause analysis:
A quick adjustment buckle is damaged;
B side mirror fixed belt pulling direction is wrong;
Troubleshooting:
A scrap treatment;
B. The direction of the fixed belt of the drawing mirror should be
the rear direction of both sides rather than the oblique rear
direction;
(3) Failure mode three: the lens is broken
Cause analysis:
A mirror hit by hard objects resulting in damage;
Troubleshooting:
A replace or repair parts;
B Diving equipment maintenance service point or manufacturer
maintenance.
